Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Key Facts
- Frequency range up to 8 GHz, 26.5 GHz or 50 GHz (up to 110 GHz with external mixers)
- Maximum dynamic range through cross-correlation
- Analysis of settling in time domain
- Oscillator characterization
- Detection, suppression and listing of interference
- Maximum flexibility for phase noise measurements
- Low-noise source for supply and tuning voltages
- Analysis of signals with digital and analog modulation
Features & Benefits
-
Highly flexible phase noise tester with versatile measurement capabilities
- Phase detector method with internal/external reference
- Two-DUT method
- High sensitivity
- Automatic setting of all important parameters
- Easy operation
- Detection, suppression and listing of interference
- Measurement of reference points as a function of frequency
- Measurement of residual phase noise
- AM noise
-
Maximum dynamic range through cross-correlation
- Sensitivity improved by up to 20 dB
- Cross-correlation up to 50 GHz in a single box
-
Unique combination of phase noise tester and spectrum analyzer
- Measurement of phase noise using the spectrum analyzer method
- Typical spectrum measurements such as ACP or interference search
- Measurement of noise figure using the R&S®FSUP
-
Analysis in the time domain
- Transient response of oscillators
-
Characteristics at the push of a button
- Low-noise voltage source for supply and tuning voltages
- Complete characterization of oscillators
-
Analysis of digital and analog modulated signals
- General vector signal analysis of digitally modulated signals
- Special analysis options for digital communications standards
- Analysis of analog modulated signals (AM/FM/φM)
Brief Description
The R&S®FSUP is a highly flexible phase noise tester with versatile measurement capabilities that combines the scope of functions of a high-end signal and spectrum analyzer with the benefits of a phase-noise-only tester.
Specifications
| Condensed Data | ||
| Operating modes | signal source analyzer | 1 MHz to 8/26.5/50 GHz |
| spectrum analyzer | 20 Hz to 8/26.5/50 GHz | |
| Signal source analyzer | ||
| Phase noise measurement | with spectrum analyzer | 10 MHz to 8/26.5/50 GHz |
| with phase comparator | 1 MHz to 8/26.5/50 GHz | |
| internal reference | 1 MHz to 8/26.5/50 GHz | |
| external reference | 1 MHz to 8 GHz | |
| with phase comparator and cross-correlation | 1 MHz to 8/26 GHz/50 GHz | |
| max. frequency offset | 30 MHz | |
| Residual noise | with phase comparator | 1 MHz to 8 GHz (with internal phase detector) |
| AM noise | specified frequency range of AM diode detector |
| Sensitivity | |||||||||
| Sensitivity with internal reference and internal phase detector | |||||||||
| Input level >+10 dBm, spurious and harmonics <–30 dBc, mode "averaged", +20 °C to +30 °C. LNA gain 40 dB, loop bandwidth ≤10 × frequency offset, max. 1 kHz. With the R&S®FSUP-B60 low phase noise option and the R&S®FSUP-B61 correlation extension option. | |||||||||
| Typical values | |||||||||
| Frequency offset | Input frequency, values in dBc (1 Hz) R&S®FSUP8/26/50 | R&S®FSUP26/50 | R&S®FSUP50 | ||||||
| 5 MHz | 10 MHz | 100 MHz | 1 GHz | 3 GHz | 7 GHz | 10 GHz | 20 GHz | 40 GHz | |
| 1 Hz | -114 | -116 | -87 | -75 | -62 | -55 | -52 | -48 | -42 |
| 10 Hz | -136 | -135 | -110 | -91 | -87 | -80 | -77 | -71 | -65 |
| 100 Hz | -143 | -146 | -134 | -115 | -106 | -97 | -95 | -89 | -83 |
| 1 kHz | -157 | -161 | -160 | -134 | -123 | -118 | -116 | -112 | -106 |
| 10 kHz | -165 | -168 | -168 | -143 | -131 | -129 | -126 | -120 | -114 |
| 100 kHz | -171 | -170 | -176 | -158 | -139 | -140 | -138 | -132 | -126 |
| 1 MHz | – | -175 | -177 | -165 | -160 | -155 | -150 | -146 | -140 |
| 10 MHz | – | – | -179 | -172 | -170 | -170 | -167 | -161 | -155 |
| 30 MHz | – | – | -179 | -172 | -170 | -170 | -170 | -165 | -159 |
| VCO parameter characterization | ||
| Measurement parameters | VCO tuning characteristic, VCO tuning slope, power, pushing ON/OFF, harmonics measurement, VCO DC characteristic, summary |
|
| Frequency range | R&S®FSUP8 | 10 MHz to 8 GHz |
| R&S®FSUP26 | 10 MHz to 26.5 GHz | |
| R&S®FSUP50 | 10 MHz to 50 GHz | |
| Power supplies | tuning ports | 2 |
| DC ports | 2 | |
| additional ports | 1 |
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | INO Sales: 028 73000184 | Rohde-schwarz- Signal Source Analyzer (Model:R&S®FSUP).
