Features
- Frequency Range: 50 Hz to 13.5 GHz
- Analysis Bandwidth
- 31.25 MHz (Standard)
- 62.5 MHz / 125 MHz (Option)
- One-Box Tester with the addition of the Signal Generator option
- Batch Capture Measurements for the fastest analysis time
Description
Signal Analysis will never be the same again
MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.
The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way — they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.
A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.
The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE.
The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.
Applications
- BTS and UE transmitter testing
- Receiver testing with the Signal Generator option
- High-performance for R&D
- High-speed for manufacturing
- General Purpose analysis for modulation R&D
- 3GPP testing including LTE/LTE-Advanced (FDD/TDD), EDGE evolution, and HSPA+
- WLAN testing including IEEE802.11a/11b/11g/11j/11n/11p and 11ac
- Extended digitizer to capture up to 4 hours of data
- Power amplifier testing
- Satellite Communications
- Physical layer Testing for all 3GPP technologies
Options
| Communication system | Applicable software |
| Basic Digital Signal Analysis | Vector Modulation Analysis Software |
| 3GPP 2G and 3G Analysis | GSM/EDGE Measurement Software EDGE Evolution Measurement Software W-CDMA/HSPA Downlink Measurement Software W-CDMA/HSPA Uplink Measurement Software TDMA IQproducer HSDPA/HSUPA IQproducer |
| W-CDMA BTS Testing | W-CDMA BS Measurement Software |
| LTE FDD Analysis | LTE Downlink Measurement Software LTE-Advanced FDD Downlink Measurement Software LTE Uplink Measurement Software LTE IQproducer LTE-Advanced FDD Option |
| LTE TDD Analysis | LTE TDD Downlink Measurement Software LTE-Advanced TDD Downlink Measurement Software LTE TDD Uplink Measurement Software LTE TDD IQproducer LTE-Advanced TDD Option |
| Mobile WiMAX Analysis | Mobile WiMAX Measurement Software Mobile WiMAX IQproducer |
| 3GPP2 Analysis | EV-DO Forward Link Measurement Software All Measure Function NEW 1xEV-DO Reverse Receiver Test Waveform Pattern NEW CDMA2000 Forward Link Measurement Software All Measure Function NEW |
| DigRF 3G RFIC Testing | Digital I/F Control Software for DigRF2.5G/3G UMTS Measurement Software for RF Device Test |
| ETC/DSRC Analysis | ETC/DSRC Measurement Software |
| TD-SCDMA Analysis | TD-SCDMA Measurement Software |
| Composite Waveforms for Signal Generator option | Multi-Carrier IQproducer |
| WLAN Analysis | WLAN (802.11) Measurement Software 802.11ac (160 MHz) Measurement Software WLAN IQproducer 802.11ac (80 MHz) Option |
| Rubidium Reference Oscillator | Aging rate ±1 × 10-10/month |
| Wideband Analysis Hardware | Extends the Analysis Bandwidth to 125 MHz |
| Analysis Bandwidth Extension | Extends the Analysis Bandwidth to 62.5 MHz / 125 MHz |
| 6 GHz Preamplifier | 100 kHz to 6 GHz |
| Vector Signal Generator | 125 MHz to 6 GHz |
| Baseband Interface Unit | For testing DigRF 3G RFIC interfaces only |
| HDD Digitizing Interface | Used for the Extended digitizer – collect data for 4 hours |
| Extension of Preselector Lower Limit to 3 GHz | Extends lower limit of pre-selector to 3 GHz |
| Noise Figure Measurement Function | Y-factor method using a Noise Source |
