- 4 A continuous/8 A peak current
- Matched to AKM motors specifically designed for the NI 9502
- Center-aligned PWM with space vector modulation and field-oriented control (FOC) for maximum torque
- Customize drive functionality with the NI LabVIEW FPGA Module
- Integrate custom I/O feedback from other NI C Series modules with LabVIEW FPGA The NI 9502 is a one-axis C Series motor drive module capable of 4 A continuous, 8 A peak current output to drive three phase brushless servo motors (BLDC or BLAC PMSM). Motor control (traditionally fixed in drive firmware) is implemented on an NI CompactRIO chassis field-programmable gate array (FPGA) and is fully customizable in LabVIEW FPGA with LabVIEW NI SoftMotion Module motor control VIs.
The NI 9502 provides an alternative to expensive and time-consuming custom drive development or exposing proprietary IP to a drive vendor and paying for custom firmware. You can implement custom drive functionality directly on the CompactRIO chassis FPGA and connect each motor directly to an NI 9502, which eliminates large stand-alone motor drives and unwieldy cabling from multiaxis embedded motion systems.
The NI 9502 can operate in either trapezoidal or field-oriented control (FOC) commutation mode, and you can use it in any CompactRIO chassis, including EtherCAT, MXI-Express, and Ethernet expansion chassis. Hall sensors (5 V) and motor phases (24 V) must be independently powered, and external encoder feedback is required for most operation modes. (The NI 9411 is recommended for encoder feedback, which can also provide Hall sensor power. The NI PS-16 24 V supply is recommended for motor power.)
