‘P’ Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar’s Professional Torque Tester. The ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, by removing the square and re-inserting on the other side of the ratchet head.
Part number: 13056
EAN Bar Code: –
NATO number: –
Accuracy: +/-3%
Operates between:
- Length: 664 mm
- Square Size: 3/4″
- Weight: 2.04 Kg
- Ratchet Type: Industrial
- Ratchet Diameter: 49 mm
- Reaction Plate Weight: 60
- Setting system is designed to discourage unauthorised alteration.
- Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
- Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
- Available with a high quality ratchet or as a ‘Torque Handle’.
- Retained square drive will not pull out of the head when the socket is removed.
- Supplied in a moulded box for storage and protection.