Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Compact Pneumatic Fatigue/Endurance Testing System
Up till now, fatigue/endurance testing systems were mainly operated by hydraulic power. However, in recent years, there has been an increasing demand for use of small-capacity testing systems in clean environments such as laboratories.
In response to this call, Shimadzu has developed the "Air-Servo" testing system that uses pneumatic force as its driving source. The Air-Servo features excellent waveform reproducibility in spite of its compact capacity and is environmentally-friendly.
In response to this call, Shimadzu has developed the "Air-Servo" testing system that uses pneumatic force as its driving source. The Air-Servo features excellent waveform reproducibility in spite of its compact capacity and is environmentally-friendly.
[Features]
- Environmentally-Friendly
The actuator*1 is driven by air-driven servo valves*2 so the surrounding area is not contaminated.
What's more, since air pressure is less than 1 MPa, this testing system is excluded from high-pressure gas protective legislation and applications not need to be submitted as such a system. - Testing Possible in Low Test Force Region
The Air-Servo demonstrates small friction owing to use of pneumatic bearings, which means that excellent waveform reproducibility is achieved in the low test force region that has been considered difficult with hydraulic power. - Precision Control Reproduced
In conventional systems that use pneumatic cylinders, precision control has been difficult by ON/OFF control of solenoid valves. The air servo, however, uses the Air-Servo valve *2 to achieve servo control and enable testing to high precision. - Simple Maintenance
Replacement of operating fluid and disposal of waste oil, such as in hydraulic systems, is not required. - Wide Range of Software Applications Supported
Supports the wide range of software applications provided by Shimadzu for fatigue/endurance testing systems.*1, *2 Patent pending
Principle of Operation of Air Servo
Compressed air from the air supply is fed to the actuator via the servo valve. The test force and displacement, on the other hand, applied on the specimen is detected by respective load cells and displacement gauges, and sent as electrical signals from the controller to the servo valve.
This controls the flowrate of the compressed air to the actuator to generate dynamic test force.
The actuator uses a pneumatic bearing mechanism, which reduces friction and improves control performance.
Compressed air from the air supply is fed to the actuator via the servo valve. The test force and displacement, on the other hand, applied on the specimen is detected by respective load cells and displacement gauges, and sent as electrical signals from the controller to the servo valve.
This controls the flowrate of the compressed air to the actuator to generate dynamic test force.
The actuator uses a pneumatic bearing mechanism, which reduces friction and improves control performance.
[Specifications]
Combination with 4830 controller (Can also be combined with 4890 controller)
| 50 Hz region* |
Type | ADT- AV01K1S5 |
ADT- AV02K1S5 |
ADT- AV05K1S5 |
ADT- AV10K1S5 |
|
| Part No. | 346- 72823-01 |
346- 72823-02 |
346- 72823-05 |
346- 72823-10 |
||
| 60 Hz region* |
Type | ADT- AV01K1S6 |
ADT- AV02K1S6 |
ADT- AV05K1S6 |
ADT- AV10K1S6 |
|
| Part No. | 346- 72823-11 |
346- 72823-12 |
346- 72823-15 |
346- 72823-20 |
||
| Max. test force | ±1 kN | ±2 kN | ±5 kN | ±10 kN | ||
| Piston stroke | ±25 mm | |||||
| Controller | 4830 Controller | |||||
| Control target | Test force, stroke (2 extra units can be added on as an option.) | |||||
|
|
|||||
|
|
|||||
| Frame rigidity | 0.0067 mm/kN (at 300 mm between crosshead and table) | |||||
| Frame drive function | Manual drive/clamp system | |||||
| Test space | Support spacing 460 mm, approx. 255 to 685 mm between crosshead and table | |||||
| Air supply (compressor) | 200/220 V 3-phase, 2.2 kW built-in air drier (240 L/min) |
200/220 V 3-phase, 3.7 kW built-in air drier (440 L/min) |
||||
| Air supply noise value | 63 db(A) (This value sometimes changes depending on the installation environment.) | |||||
| Air supply port | One-touch coupler for 10" dia. nylon tube | |||||
| Instrument weight | Approx. 230 kg | Approx. 235 kg | Approx. 240 kg | Approx. 245 kg | ||
| Compressor weight | Approx. 162 kg | Approx. 162 kg | Approx. 174 kg | Approx. 174 kg | ||
|
400 VA | |||||
| 2.8 kVA | 5 kVA |
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | INO Sales: 028 73000184 | Shimadzu-Air-Servo ADT (Model:A Series).
