This mode features an advanced GPIB interface function which allows DC power supplies to be compatible with automated measuring systems. In addition to control of each output,the listener/talker function allows read back of the measured values for output voltage and current. As a result,this mode allows you to easily put together a system with unmatched safety.
- 2 channels(allowing control of two power supplies)
- Setting of output voltage,output current,overvoltage protector and voltage drop protector possible for each channel.
- Measured values for output voltage and output current can be read back for each channel.
- Setting and read back of actual output can be performed by automatic ID recognition.
- Each channel is isolated.
- Setting resolution is 12 bits for each output.
- All panel control functions can be operated by GPIB.
Sequence control mode
This mode is used for effecting programmable control of DC power supplies during simulation testing and other similar applications. This mode allows storage of addresses for each of the settings and execution times of the DC power supplies up to a maximum of 256 steps via a GPIB interface. In addition,it is also capable of storing a maximum of 6 sequence patterns between any consecutive addresses. These sequence patterns can also be executed by recalling from the panel in the local mode when the controller is not connected to the GPIB interface.
- Max. of 256 steps In normal speed mode (including output voltage,output current,overvoltage protector,voltage drop protector,execution time and output on-off switching).
Normal Speed Mode:50 ms to 7999s/step
High Speed Mode:0.2 ms to 999.8ms/step - Allows storage and recall of up to 6 sequence patterns.
- Sequence patterns can be backed up.
