Themeasuringsystemof theMM400isbasedonanadvanced MICROPROCESSOR technology that detects the percentage of moisture held by the aggregates, through specific sensors installed in the weigher or in the storage hoppers.
The instrument can analyze the humidity in 4 AGGREGATES with different diameters: small, medium or large ones. Through a special configuration menu, it allows selection of the most suitable diameter-curve from among themostcommononesusedintheconcreteindustry,foreasyand straighforward setup.
MM400hasanLCDforareal-timereadoutofthepercentageof moisturedetected by the probes connected to it. It can be used either during a MANUAL production cycle, by selecting
the probe through the special keys located on the front panel, or during the AUTOMATIC cycle through special opto-isolated digital inputs that enable the reading of the specific probe only during analysis, instantly transmittingtotheautomaticbatchingsystemthesamepercentage
indicated by the display through the 0-10V analog output or RS232 serial output.
Measurement accuracy: +/-0.3 percent
•Displayable reading field: from 0% to 20%, resolution 0.1%
•Reading settlement: 0.5 seconds
•Maximum probe distance: about 100 meters
•Connection cable: min. 4 x 0.5 mm, shielded
•Display: liquid crystals, 2 x 16 alphanumeric characters
•Keyboard: 6 keys for data input and probe selection
•Container: DIN 72 x 144
•Temperature probe input: PT100
•Analog output for percentage humidity: 0-10 Vdc
•Analog temperature output: 0-10 Vdc
•Power supply: 24 Vac +/- 10% 50/60 Hz
•Maximum absorption: approx. 25 VA
•Operating temperature: from 0° to 50° C
•Protection: front IP50, back IP20
•Weight: approx. 1 Kg
•Connections: coupling terminals
