Land – SPRINT 8 Digital Thermometer

0
319
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

For Process Monitoring and Control Applications

Sprint 8 is a rugged and compact digital infrared thermometer with a wide temperature range – from less than room temperature up to 1800F.  Ouput is a standard loop powered 2-wire 4-20mA DC.

Models with optional Green LED aiming diodes are available. This feature simplifies alignment when a measurement object is otherwise difficult to target. The Green LED spot size and location approximates the actual measurement spot size at the measurement distance. To make installation easy Sprint 8 is housed in a solid stainless steel tubular body with a 40mm x 1.5 external thread. Optional cooling jackets and air purges allow Sprint 8 to operate in hostile environments.

USB Configuration

A USB configuration interface on the rear of the Sprint 8 allows configuration of Temperature measurement span, Emissivity, °F or °C reading and response speed.

In research and laboratory environments the Sprint 8 can be operated exclusively over it’s USB connection to the supplied EasySpot for Windows interface software.

Key Features

  • Machined from durable stainless steel to survive harsh environments
  • Compact size allows easy installation in tight areas
  • Standard 2-wire 4-20mA loop output for simple connectivity
  • Digital design provides flexible configuration of top[ and bottom temperature, emissivity adjustment and reponse speed

The Sprint 8 is supplied with 2 40mm lock nuts, EasySpot Setup Software and User Guide

Thermometer Models

Thermometer Models Focus Aiming Part Numbers
Sprint 8 – 4 4 inches Manual LD-4408241301
Sprint 8 – 12 12 inches Manual LD-4408242301
Sprint 8 – 30 30 inches Manual LD-4408243301
Sprint 8 – 48 48 inches Manual LD-4408244301
Sprint 8 L-4 4 inches Green LED LD-4408251301
Sprint 8 L-12 12 inches Green LED LD-4408252301
Sprint 8 L-30 30 inches Green LED LD-4408253301
Sprint L-48 48 inches Green LED LD-4408254301

Optical Variants

Optics (focus point in bold)      4" Focus
Spot size (mm) Distance (mm)  0 50 100 150 200 250 300 400 500 800
Sprint 8 (L)-4 32-1800°F   15 8.5 2 10.5 19 27.5 36 53 70 121
   12" Focus
Spot size (mm) Distance (mm) 0 100 200 300 400 500 600 800 1000 1200
Sprint 8 (L)-12 32-1800°F 15 12 9 6 13 20 27 41 55 90
   30" Focus
Spot size (mm) Distance (mm) 0 200 400 600 800 1000 1200 1500 2000 4000
Sprint 8 (L)-30 32 – 1800°F 15 15.3 15.5 15.8 16 23.8 31.5 43.1 62.5 140
   48" Focus
Spot size (mm) Distance (mm) 0 200 400 600 800 1000 1200 1500 2000 4000
Sprint 8 (L)-48 32 – 1800°F 15 15.8 17.3 18.8 19.5 21.8 24 33.8 50 115
Temperatures
Low Temperature (C): 0 High Temperature (C): 0
Low Temperature (F): 32 High Temperature (F): 32

Technical Details

Sprint 8 Digital Thermometer

Sprint 8 Sprint 8-L with Green LED
Measuring range 0-1800°F 32-1800°F
Spectral range 8 to 14 ?m 8 to 14 ?m
Optics (see table inside) 4, 12, 30 and 48 inch focus factory set versions
Internal Signal processing Digital
Emissivity 0.2 to 1.0, adjustable via USB interface
Measurement Span Adjustable anywhere within range, minimum span 100 °F
Response speed (95% energy) 60 ms (min.), adjustable 100 ms to 100 s via USB interface
Uncertainty 1% of meas. value specified in Kelvin
Repeatability 0.5 % of meas. value specified in Kelvin
NETD 0.05 °F
Output two-wire 4 to 20 mA temperature linear, into 600 Ohm load at 24V
Interface USB interface (galvanically isolated)
Aiming Manual Green LED
Parameters Adjustable via USB interface and supplied EasySpot software:
emissivity; response time; Units °F / °C, measurement span
Power supply 24 V DC +/- 25%, ripple 500 mV max
LED: 7 … 30 V DC, <200 mW
Power consumption max. 0.6 W (without aiming LED)
Operating temperature 0 to +160°F
Storage temperature -4 to +160°F
Housing Stainless Steel, IP 65 sealed
Weight Approx. 1lb
Dimensions Thermometer body length 5 inches, threaded 40mm x 1.5

Continuous Product Development may change these details without notice

Cables and Accessories

Part Description Part Number
U8-15F 15 foot prewired connector/cable for Sprint U8 LD-3310A11312
U8-48F 48 foot prewired connector/cable for Sprint U8 LD-3310A11314
U8 L-15F 15 foot prewired connector/cable for Sprint U8 L LD-3310A11512
U8 L-48F 48 foot prewired connector/cable for Sprint U8 L LD-3310A11514
U8U-5F USB Programming cable 5Ft for Sprint LD-3310A14010
U8-JP Cooled jacket for Sprint (inc. purge & bracket) LD-3310A23010
U8-P Air purge with mounting plate for Sprint LD-3310A22010
U8-SM Single-axis adjustable mount for Sprint LD-3310A21010
U8-DM Dual-axis adjustable mount for Sprint LD-3310A21011

The Sprint 8 is ideal for low temperature applications, measuring materials such as:

  • Paper
  • Minerals
  • Plastic Extrusion
  • Asphalt Plants
  • Roofing Shingle Production
  • Conveyor Belts
  • Research
  • Pet Food
  • Textiles

Resource & Download

Flag-us DATA Sprint 8 Data Sheet application/pdf Download File
(2.31 MB)
Flag-us MANUAL Sprint 8 User Guide application/pdf Download File
(1.23 MB)
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | INO Sales: 028 73000184 | Land – SPRINT 8 Digital Thermometer.