Ball Bearing single row 6016-SKF-Model: 6016 2ZC3

SKF Single row deep groove ball bearing with two metal shields & C3 clearance 80mm inside x 125mm outside x 22mm width, also known as 60162ZC3, 6016ZZC3, 6016ZC3

SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Shields
Bearings with shields are primarily intended for applications where the inner ring rotates. Shields are fitted in the outer ring and do not make contact with the inner ring, but form a narrow gap with it. Shields are made of stainless steel.

Depending on the bearing design, series and size, SKF supplies shields in different designs.

Shields identified by the designation suffix Z typically have an extension in the shield bore (fig. 1) to form a long, narrow gap with the inner ring shoulder. Some shields do not have the extension (fig. 2) or the shield bore can extend into a recess on the inner ring (fig. 3).

Principal Dimensions
Inside diameter d: 80mm
Outside diameter D: 125mm
Width B: 22mm

Basic Load Ratings
Dynamic: 49,4kn
Static: 40kn

Speed Ratings
Reference speed: 11 000 r/min
Limiting speed: 5 600 r/min

Dimensions mm
d1: 94,4
D2: 114
r1,2 min: 1,1

Related categories for 6016-2Z/C3 SKF Metric Shielded Deep Groove Ball Bearing 80x125x22mm

• SKF Deep Groove Ball Bearings
• SKF Bearings
• Deep Groove Ball Bearings

Other SKF Deep Groove Ball Bearings similar to 6016-2Z/C3 SKF Metric Shielded Deep Groove Ball Bearing 80x125x22mm

• 6313 SKF Open Deep Groove Ball Bearing 65x140x33mm
• 6240M SKF Open Deep Groove Ball Bearing With Brass Cage 200x360x58mm
• 61905 SKF Open Deep Groove Ball Bearing 25x42x9mm
• 6014-2RS1/C3 SKF SKF Sealed Deep Groove Ball Bearing 70x110x20mm
• 607-2Z SKF Shielded Deep Groove Ball Bearing 7mm Bore
• View all SKF Deep Groove Ball Bearings